SAGA OMBRE PAINT

SAGA OMBRE PAINT
SAGA OMBRE PAINT
★★★★★ No ratings yet

SAGA PROFESSIONAL OMBRE PAINT – GEL PAINT FOR BLENDING AND OMBRÉ DESIGNS

Ombre Paint is a pigmented gel paint for smooth colour transitions, soft shading and ombré designs. Its oil-paint-like texture blends evenly with a sponge and allows colour intensity to be built gradually.

Use with a blending sponge and holder to create diffused transitions without an airbrush. For even blending, apply to a clean, dry, matte coating. Prepare the surface with a dried matte gel top coat or gently remove the shine from the existing coating with a fine-grit buffer.

Leaves no sticky layer after drying and does not require a separate top coat. If desired, finish the design with a matte or glossy gel top coat.

Out of stock
YOUR CHOICE IS: —

8.95 €

Pay with Esto hire purchase

Features

  • Pigmented gel paint for ombré techniques.
  • Easily blended, oil-paint-like texture.
  • Creates smooth colour transitions.
  • Suitable for sponge application.
  • Buildable colour intensity.
  • Recommended for application over a matte coating without a sticky layer.
  • Leaves no sticky layer after drying.
  • Top coat optional.

Application

  1. Prepare the nail plate, apply a suitable base gel and your chosen base colour. Dry each product according to its instructions.
  2. Prepare a matte surface using either method:
    • Apply a matte gel top coat over the base colour and dry. If it leaves a dispersion layer, remove it with a suitable cleanser and allow the surface to dry completely.
    • Alternatively, remove the sticky layer from the dried coating, gently remove the shine with a fine-grit buffer and thoroughly remove dust. Cleanse and allow to dry completely. Buff only the coating, avoiding filing through it.
  3. Secure a clean blending sponge in the holder and pick up a small amount of Ombre Paint.
  4. Dab off the excess onto a palette, distributing the paint in a thin, even layer across the sponge.
  5. Apply with gentle dabbing motions. Blend the transition and build colour intensity gradually. Avoid skin contact.
  6. Dry in an LED lamp for 60 seconds.
  7. Repeat in thin layers if needed, drying each separately.
  8. If desired, finish with a matte or glossy gel top coat and dry according to its instructions.

Drying time

60 seconds per layer in an LED lamp.

Ingredients

Polyurethane-9, Hydroxypropyl Methacrylate, Mica, Trimethylbenzoyl Ditolylphosphine Oxide, Bentonite, Triethoxycaprylylsilane, +/- CI 77891, CI 77007, CI 77742.

Warnings

For professional use only. Avoid contact with skin and eyes. May cause an allergic reaction. Keep out of reach of children. Read the instructions carefully.

Net weight: 5 g.